SPIRIT SYN RS
Synthetic Compressor Oil
QUANTUM SPIRIT SYN RS compressor lubricant formulated from synthetic base fluid utilizing synthetic hydrocarbon (PAO) with specially developed additive systems.
QUANTUM SPIRIT SYN RS is rated H1 for use in food processing plant applications.
Applications
- Oil flooded rotary screw compressors.
- Oil flooded rotary vane compressors.
- May also be considered for other applications requiring an oxidation resistant lubricant.
- Nominal operating Range is -20C to 205C.
Compatibility
QUANTUM SPIRIT SYN RS synthetic hydrocarbon based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets and hoses. No special precautions related to compatibility are required when changing over from a mineral oil lubricant to a QUANTUM SPIRIT SYN RS synthetic hydrocarbon based lubricant.
18 Liters pails, and 209 Liters drums
Customer Benefits
- Excellent oxidation resistance.
- Fewer oil changes.
- Lower oil consumption.
- Reduced varnish lacquering and deposits.
- Greatly reduced fire and explosion hazard.
- Reduced compressor maintenance.
- Compatible with compressor seals, gaskets, hoses, and air system components.
Approval/Certification
QUANTUM SPIRIT SYN RS synthetic lubricants are field tested, approved or recommended by most major compressor manufacturers. Should you have any questions regarding the suitability of QUANTUM SPIRIT SYN compressor lubricants for a specific manufacturer's model compressor, please contact
QUANTUM PETROLEUN [M] SDN BHD.
Product Typical
|
Characteristics |
46 |
68 |
100 |
150 |
| Viscosity, cSt |
|
|
|
|
| @40C |
45.1 |
67.2 |
142 |
96.0 |
| @100C |
7.6 |
10.6 |
17.1 |
13.0 |
| Specific Gravity @25 C |
0.83 |
0.83 |
0.84 |
0.84 |
| Viscosity Index |
145 |
155 |
130 |
133 |
| Pour Point (max.), C |
-54 |
-51 |
-46 |
-46 |
| Flash Point (min.), C |
238 |
243 |
260 |
260 |
| Demulsibility, ml, Oil/water/emulsion (minutes) |
40/38/2(10) |
40/38/3(10) |
40/37/3(10) |
40/38/2(10) |
| Foaming tendency |
NIL |
NIL |
NIL |
NIL |
| Four Ball Wear Test, mm |
0.65 |
0.65 |
0.58 |
0.60 |
| Copper Corrosion |
1A |
1A |
1A |
1A |
| Food Grade (USDA H1) |
Approved |
Approved |
Approved |
Approved |
Customer Advice
For further assistance on product MSDS, recommendation or technical queries, please liaise with the regional technical services engineer or contact HQ technical engineers.
