HORNET 11000
High Performance, Two-Stroke Marine Outboard Engine Oil
QUANTUM Hornet 11000 is super premium performance engine oil for use in two-stroke water-cooled outboard engines operating at all fuel to oil ratios specified by the OEMs. It is also suitable for motorcycle, snowmobile, water scooters, chainsaws, lawn mowers, small generators and other two-strokes engines where the manufacturers calls for NMMA TC-W3 oil.
Manufactured from selected premium quality base oils and fortified with advanced non metallic, ashless additives system to provide maximum engine protection during storage and minimize spark plug fouling, pre-ignition, ring sticking and combustion chamber deposits.
Applications
Recommended for use in all water-cooled, two-stroke, marine outboard engines (both pre-mix and direct oil injection) operating in all service conditions and other two-stroke engines where NMMA TC-W3, TC-WII or TC-WI oils are specified.
Product Typical
| Density @ 15 C, kg/l |
0.8930 |
| Pour Point, C |
-9 |
| Flash Point, C |
216 |
| Kinematic V iscosity, cSt |
| @ 40 C |
56 |
| @ 100 C |
7.5 |
| Colour |
Blue |
Specifications
- NMMA TC-W3 (Registration No. R-60173)
Customer Benefits
- Approved and exceeded the recertification requirements of the severe NMMA TC-W3 standards.
- Reduced spark plug fouling and pre-ignition its advanced ashless formulation minimized combustion chamber deposits to enhance engine performance and durability and eliminating the risk of preignition-induced engine damage.
- Its superior dispersants keep piston clean and avoid ring sticking to ensure peak performance engine operation and lower maintenance costs.
- Improved lubricity to prevent piston and cylinder scuffing.
- Excellent rust protection - to prevent rusting of critical engine parts during operation and storage for longer engine life.
- Pre-mixed for easy use - prediluted with a high flash point solvent to facilitate mixing with gasoline at all temperatures.
Customer Advice
For further assistance on product MSDS, recommendation or technical queries, please liaise with the regional technical services engineer or contact HQ technical engineers.
