HARRIER 18000
Ultimate Performance with Outstanding Soot Control, Multigrade Diesel Engine Oil exceeding API Service CI-4 and ACEA E2-96 Performance Levels
QUANTUM Harrier 18000 is advanced ultimate-performance SAE 15W-40 multigrade diesel engine oil for use in the most severe on-highway and off-highway applications. It is specially engineered for modern, high-output, low-emission engines including those fitted with Exhaust Gas Recirculation (EGR) as well as older high speed turbocharged engines running on low sulphur diesel or conventional high sulphur diesel fuel.
Its advanced additive system ensure excellent control over soot induced wear, high temperature piston deposits, corrosion, foaming and oxidation stability. It also provides excellent resistance to bore polishing, a high level of wear protection and ensure superior engine cleanliness at extended drain intervals.
Applications
Recommended for use in high performance diesel applications including the latest low emission engines fitted with EGR technology as well as naturally aspirated diesel engines, both on-highway and off-highway, running on high or low sulphur diesel. It is also recommended for gasoline engine such as pick-up trucks, four wheel drive (4WD) and sport utility vehicles (SUVs)
Customer Benefits
- Exceeds all major American, European and Japanese OEM and Industry specifications.
- Excellent performance with extended oil drain intervals on low emission engines.
- Exceptional soot dispersancy, preventing deposits on critical engine components and provide excellent protection from soot induced wear.
- Excellent TBN retention effectively extend drain interval capability.
- Excellent thermal and oxidation stability that minimized low temperature sludge build-up and high temperature deposits.
Product Typical
|
Characteristics |
Value |
| Density @15 C, kg/l |
0.8749 |
| Pour Point, C |
-33 |
| Flash Point, C |
224 |
| Kinematic Viscosity, cSt |
|
| @ 40 C |
108 |
| @ 100 C |
14.5 |
| Viscosity Index |
137 |
| Cold Cranking Visc @-20C, cP |
6,550 |
| Sulphanated Ash, %wt |
1.2 |
| ASTM Colour |
3.0 |
The product typical may change without notice, however the performance of the product would meet & exceed the API & OEM requirements.
Will meet the requirements of:
- API CI-4/CH-4/CG-4/CF-4/CF/SJ/CF-2
- ACEA E2-96 ISSUE 5/B3-98ISSUE2//A2-96 ISSUE 3
- MB 228.1/229.1
- MAN 271
- Volvo VDS-2
- CES 20076
- ALLISON C-4
- CATERPILLER ECF 1
- ZF TE-ML07C
- ZF TE-ML04C
Customer Advice
For further assistance on product MSDS, recommendation or technical queries, please liaise with the regional technical services engineer or contact HQ technical engineers.
